Black DTF blockout powder is used to block clothing colors or patterns. That may be visible through transfer. It is best to mix it with the standard white DTF powder to improve wash ability, as the black powder itself is not that strong.

PET film, also called DTF, direct transfer film, which is a new technology for T-shirt heat transfer-digital offset heat transfer.


  • For the best hand feel, use a extremely fine powder. However, it is not suitable for speed. I'd recommend it to someone like DTG.
  • Fine powder for a comfortable grip. Good transformation and quickness T-shirt is a good suggestion for a decent necessity.
  • Normal powder. The transformation is normal, and the speed is good. Suggestions for a regular T-shirt For the best fastness, use
  • Coarse powder. Hand feel is typical. Suggest a LOGO for the brand Clothing for the fall and winter.
  • For excellent jeans and washing label fastness, hard hand sensation.
  • Lower temperature powder to avoid second-time sublimation of the protester. Preheat the press to around 110 degrees Fahrenheit.


DTF powder is a unique type of powder used in DTF printing. Our powder has outstanding adhesion, wash ability, and may stick to ink rather than film with precision.
This powder can be squeezed for 10-20 seconds and cured at 150C or 300F. To obtain a better feel, press the completed transfer again for 10 seconds and place a piece of parchment paper on top.
This powder can be cured using a hot air gun or a hot press in an oven.
To use the powder, follow these steps:

  • Place the transfer paper on a cushion or foam that has been hot-pressed.
  • Move the top heating plate away from the transfer by about 1 cm.
  • Melt the powder in the oven at 160 °C for about 2 minutes.
  • At first, it will become sparkling. Then it will melt and form a flat surface.
Download Brochure