X

DTF HEAT TRANSFER FILM

DTF HEAT TRANSFER FILM

Size:  50 cm, 60CM, 120 cm X 100m/Roll 
One-sided Matte Finish.
Smooth And Clean Surface..
75μm /100 μm.
Conventional: 60 cmx100m/roll
Special Rules: Width 60cm, The Number Of Meters Can Be Customized
Applicable Ink: Pigment Ink

PET film, also called DTF, direct transfer film, which is a new technology for T-shirt heat transfer-digital offset heat transfer.

Download Brochure

DTF Heat Transfer Film

Testing Condition

Ink-load: 400% Max Transfer Temperature: 200-230℃ Transfer Time: 20-30 seconds.

About Storage

In order to protect unused sublimation paper, it is recommended to store it in its original packaging, in the poly bag at 68 °F -82 °F(20 °C -28 °C and 40-60% RH.

About Printing

Image side is wound to the outside of the paper. Allow the printing ink to dry before transferring.

FEATURES & BENEFITS


  • The surface is smooth and clean.
  • Strong ink absorption capacity, thick ink absorption layer.
  • The color of the pattern is realistic and complete, no halo.
  • Excellent physical and mechanical properties.
  • Low shrinkage, high temperature resistance.
  • Small thickness tolerance, good matte, low heat shrinkage, good release.

Matters Needing Attention

Storage environment:

  • Relative humidity 35-65%, temperature 10-30°C, sealed indoor storage, avoid direct sunlight, shelf life 1 year.

    • Precautions for washing:

    • We recommend washing the transferred T-shirts separately with ordinary detergent and cold water.
    • Do not mix with other clothes at the same time.
    • Do not dry clean or bleach.
    • Dry them immediately after washing. Or use a dryer to dry. After washing, if the image shows signs of shedding, you can cover the image with grease proof paper and iron it again. Do not iron the transfer part directly with an iron.

    Technical Specifications

    Use process:

  • Double-head printing: after finish color printing, it is recommended that the white ink circulation to ensure the smoothness of the ink.
  • Pattern directly digital printing on the film-sprinkle hot melt powder-shake powder-dry melt powder-heat pressing.

    • Print suggestions:

    • Pressing conditions: 150-170℃, time 8-15 seconds.
    • Tear off method: hot peel; cold peel.